Self-Leveler Plus
Self-Leveling Underlayment
Self-Leveler Plus is a high-strength, regular-setting, cement-based, self-leveling underlayment, for use over interior concrete, plywood and other approved floor surfaces. Self-Leveler Plus is convenient and easy to use. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.
AVAILABLE AT SELECT RETAIL LOCATIONS ONLY
Self-Leveler Plus is a high-strength, regular-setting, cement-based, self-leveling underlayment and repair mix
for use over interior concrete, plywood and other approved floor surfaces. Self-Leveler Plus is convenient and easy
to use. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.
AVAILABLE AT SELECT RETAIL LOCATIONS ONLY
- Convenient: Just mix and pour.
- Smoothes and flattens interior floors
- Cures to provide a flat, hard, smooth surface to receive a variety of floor-covering materials
- Compatible with a wide variety of tile and stone mortars, floor-covering adhesives, and epoxy and polyurethane adhesives
- Can be installed from 1/8″ to 1″ (3 mm to 2.5 cm) thick in a single pour
- Ready for ceramic tile or stone in 24 hours
- Ready for other types of floor coverings after 2 to 3 days
- Mix with water only.
FAQs
Do I have to use a primer with Self-Leveler Plus?
MAPEI's Self-Leveler Plus always requires the use of a primer such as MAPEI's Primer T.
What are the minimum requirements for using Self-Leveler Plus over plywood?
All plywood substrates must consist of a double layer of exterior-grade plywood. Each layer should be at least 5/8" (16 mm) to 3/4" (19 mm) thick, to equal a total combined thickness of at least 1-1/4" (3.2 cm).
Will Self-Leveler Plus level by itself?
MAPEI's Self-Leveler Plus is not as fluid as water. So, it requires a little help in guiding the flow of the mixed product and in smoothing out the surface. The use of a self-leveling tool kit often helps to obtain a smooth, level, finished surface.
Can I pour MAPEI's Self-Leveler Plus by myself?
Ideally, there should be at least 3 people present when pouring a self-leveling underlayment such as MAPEI's Self-Leveler Plus. It is best to have 1 person mixing, 1 person smoothing, and 1 person pouring and transporting the buckets of mixed product.