Ultracolor Plus FA
Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts
Ultracolor Plus FA – with DropEffect technology and CO2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.
MAPEI promotes the total offsetting of residual CO2 emissions during the life cycle of products by acquiring certified environmental credits to support the implementation of renewable energy projects.
CO2 emissions measured throughout the life cycle of products from the Zero line in 2023, using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of third-party-certified carbon credits in support of renewable energy and forestry protection projects: A commitment to the planet, to people and to biodiversity.
For more details on how emissions are calculated and on climate-mitigation projects that are financed through certified carbon credits, click here.
EPD
Available Colors
FAQs
Can Keracolor® S be used in joints 1/8" (3 mm) or smaller?
MAPEI's Keracolor S contains sand. So, when it is used for joints narrower than 1/8" (3 mm), it will be difficult to pack the grout fully into the joint. This often results in voids below the surface of the grout, which turn into areas of missing grout over time. It is best to use MAPEI's Keracolor U, Ultracolor® Plus FA or MAPEI Flexcolor® CQ grout for joints less than 1/8" (3 mm) wide.
Can Keracolor® S be used to grout pebble tile?
It is best to use MAPEI's Ultracolor® Plus FA grout when grouting pebble stone and river rock mosaics.
Is Keracolor® S recommended with wood-look tile?
It is best to use MAPEI's Ultracolor® Plus FA grout or MAPEI Flexcolor® CQ grout for grouting installations of wood-look plank tile.
Can Keracolor® U be used in joints 1/8" (3 mm) or larger?
When MAPEI's Keracolor U is used for joints wider than 1/8" (3 mm), it may result in hairline cracks and the grout may dry to a level lower than the height of the surface of the tile. It is best to use MAPEI's Keracolor S, Ultracolor® Plus FA or MAPEI Flexcolor® CQ grout for joints more than 1/8" (3 mm) wide.
Can Keracolor® U be used to grout pebble tile?
It is best to use MAPEI's Ultracolor® Plus FA grout when grouting pebble stone and river rock mosaics.
Is Keracolor® U recommended with wood-look tile?
It is best to use MAPEI's Ultracolor® Plus FA, MAPEI Flexcolor® CQ or Kerapoxy® CQ grout for grouting installations of wood-look plank tile.
Is Ultracolor® Plus FA a sanded grout?
MAPEI's Ultracolor Plus FA grout contains a fine aggregate, which enables the grout to be used in a tight grout joint as thin as 1/16" (1.5 mm).
Can I use Ultracolor® Plus FA with installations of natural stone?
MAPEI's Ultracolor Plus FA contains a fine aggregate. So, it is a great choice for grouting most installations of natural stone. When grouting installations of polished stone tile, it is recommended to build a mockup (sample board) or, at the very least, test Ultracolor Plus FA in an inconspicuous area before grouting.
Can Ultracolor® Plus FA be used to grout unfilled travertine and limestone tile?
Yes.
CanUltracolor® Plus FA be used to grout pebble tile?
MAPEI's Ultracolor Plus FA grout is a great choice for grouting installations of pebble stone and river rock mosaics.
Can I use Ultracolor® Plus FA with installations of glass tile?
MAPEI's Ultracolor Plus FA contains a fine aggregate. So, it is a great choice for grouting most installations of glass tile. When grouting installations of delicate glass tile, it is recommended to build a mockup (sample board) or, at the very least, test Ultracolor Plus FA in an inconspicuous area before grouting.
Can I use Ultracolor® Plus FA with glossy wall tile?
MAPEI's Ultracolor Plus FA contains a fine aggregate. So, it is a great choice for most installations of glossy wall tile. When grouting installations of antique or handmade wall tile, it is recommended to build a mockup (sample board) or, at the very least, test Ultracolor Plus FA in an inconspicuous area before grouting.
Is Ultracolor® Plus FA recommended with wood-look tile?
MAPEI's Ultracolor Plus FA grout is a great choice for grouting installations of wood-look plank tile.
Can Ultracolor® Plus FA be used in a pool?
MAPEI's Ultracolor Plus FA grout is a great choice for pool installations and other submerged applications.
Can Ultracolor® Plus FA be mixed with an additive?
Additives are not recommended with MAPEI's Ultracolor Plus FA grout.
What is the proper way to mix a rapid-setting, cement-based grout?
Be sure to follow the packaging instructions carefully when mixing. Use cool or cold water, keep the water-to-powder ratio correct and adhere to the short mixing time. (Ultracolor® Plus FA does not require "resting" time.) Use a drill rather than mixing by hand. Do not add more water if the product begins to thicken.
Can Ultracolor® Plus FA be sealed?
Although MAPEI's Ultracolor Plus FA grout does not require a sealer, it can be sealed. Select a high-performance, penetrating grout sealer, such as ourUltraCare® Penetrating Plus SB Stone & Porcelain Tile Sealer.
How long before Ultracolor® Plus FA can be sealed?
Wait at least 24 hours before applying a sealer over MAPEI's Ultracolor Plus FA grout.
Can MAPEI's Ultracolor® Plus FA grout be mixed with an additive?
Additives are not recommended with MAPEI's Ultracolor Plus FA.
How soon can Ultracolor® Plus FA be sealed?
Wait at least 3 days before applying a sealer over MAPEI's Ultracolor Plus FA grout.
Can MAPEI Flexcolor® CQ be used to grout pebble tile?
MAPEI Flexcolor CQ grout is not recommended for grouting installations of pebble stone and river rock mosaics. It is best to use MAPEI's Ultracolor® Plus FA grout when grouting pebble stone.
Can Kerapoxy® CQ be used to grout pebble tile?
MAPEI's Kerapoxy CQ grout is not recommended for grouting installations of pebble stone and river rock mosaics. It is best to use MAPEI's Ultracolor® Plus FA grout when grouting pebble stone.
Can Keracolor® S be used in a pool?
MAPEI's Keracolor S grout can be used in submerged applications, such as pools, but a 21-day curing time is required before filling the pool. MAPEI's Ultracolor® Plus FA grout is a better choice for pool installations where submersion can be completed after 72 hours of grouting when the tiles are installed with an appropriate rapid- setting mortar.
Can Keracolor® U be used in a pool?
MAPEI's Keracolor U grout can be used in submerged applications, such as pools, but a 21-day curing time is required before filling the pool. MAPEI's Ultracolor® Plus FA grout is a better choice for pool installations.
Can I use Ultracolor® Plus FA to regrout over old grout?
Cement-based grouts, such as MAPEI's Ultracolor Plus FA grout, will not effectively bond to themselves or other grout types. So, if the existing grout is damaged, then at least 2/3 of the depth of the grout joint must be removed before regrouting. Note: If the existing grout is simply discolored, MAPEI's UltraCare® Grout Refresh™ can restore the look without removing the existing grout.
Can I use MAPEI's Keracolor® S or Ultracolor® Plus FA grouts to regrout over old grout?
Cement-based grouts, such as MAPEI's Keracolor S or Ultracolor Plus FA grouts, will not effectively bond to themselves. So, if the existing grout is damaged, then at least 2/3 of the depth of the grout joint must be removed before regrouting. Note: If the existing grout is simply discolored, MAPEI's UltraCare® Grout Refresh™ can restore the look without removal of the existing grout.
Does Ultracolor® Plus FA need to be sealed?
MAPEI's Ultracolor Plus FA is stain-resistant and does not require a sealer. However, a high-performance, penetrating grout sealer may still be applied from MAPEI's UltraCare® family of sealers, which includes UltraCare Penetrating Plus Stone, Tile & Grout Sealer and UltraCare Penetrating Plus SB Stone & Porcelain Tile Sealer. Follow the directions provided in the UltraCare Maintenance Guide.