UltraCare Heavy-Duty Stone, Tile & Grout Cleaner
UltraCare® Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.
- Removes most wax, grease, soap scum, body oil, mildew stains and algae
- Ideal for neglected areas or areas subjected to heavy use
- Specially formulated to strip off synthetic and acrylic waxes and floor finishes
FAQs
Can I use MAPEI's 4 to 1™ Mud Bed Mix to create the slope for my shower floor?
Yes, MAPEI's 4 to 1 Mud Bed Mix is highly recommended for use as a dry-pack mortar when building a mud bed to create a proper slope on a shower floor.
How thin can I apply 4 to 1™ Mud Bed Mix?
MAPEI's 4 to 1 Mud Bed Mix can be applied as thin as 3/8" (10 mm).
How thick can I apply 4 to 1™ Mud Bed Mix?
MAPEI's 4 to 1 Mud Bed Mix can be applied as thick as 3" (7.6 cm).
How should I mix 4 to 1™ Mud Bed Mix?
MAPEI's 4 to 1 Mud Bed Mix can be mixed by hand using a wheelbarrel and a shovel. Start by mixing 2 U.S. qts. (1.89 L) of water for the entire bag and very gradually add up to 1 U.S. qt. (946 mL) of water as needed to obtain the desired consistency. Note: When using MAPEI's 4 to 1 Mud Bed Mix to create a slope, the consistency should be fairly stiff.
How soon can I apply Mapelastic® AquaDefense over a sloped mud bed?
After creating a slope with a fresh mud bed using MAPEI's 4 to 1™ Mud Bed Mix, the area should be allowed to cure for at least 48 hours before application of MAPEI's Mapelastic AquaDefense. Curing time is based on 73°F (23°C). Cooler temperatures will require longer curing times.